Note: This is an archived topic. It is read-only.
   CL Sailboats Online Forum
  Sandpiper 565
  mast to boom

UBBFriend: Email This Page to Someone!

profile | register | preferences | faq | search



This topic was originally posted in this forum: S565
Author Topic:   mast to boom
doug c
JuniorMember 		posted July 30, 2007 07:38 PM     Click Here to See the Profile for doug c   Click Here to Email doug c     
I have recently purchased a sandpiper and am looking for digital pics or info for the back part of the slide hardware that connects to the boom gooseneck and which when tightened holds the boom in place. I have the sliding hardware and wing screw but I think some piece is missing which when the wing screw tightened the boom will be locked in position.
Also, info on what the hardware looks like for the piece which stops the main sail slugs from sliding down and out of the mast groove...
thanks for you comments....

DonW
Member 		posted July 30, 2007 08:17 PM     Click Here to See the Profile for DonW   Click Here to Email DonW     
These are the only pictures I have of that fitting..
1/ boom slid back to allow roller reefing of main..

and..
2/fitting inserted all the way in for sailing

[This message has been edited by DonW (edited July 30, 2007).]

All times are ET(US)

This is an ARCHIVED topic. You may not reply to it!
Hop to:

Contact Us | CL Sailboats: Online


Ultimate Bulletin Board 5.45b