CL Sailboats Online Forum
CL User Forum #2 (Temporary)
DIY, CL14 outboard motor mount
profile | register | preferences | faq | search
UBBFriend: Email This Page to Someone!
next newest topic | next oldest topic
Author
Topic: DIY, CL14 outboard motor mount
bpong Member
posted February 27, 2007 05:12 PM
attached is my take on an outboard motor mount for my CL14. it is constructed with 3/4" plywood, epoxy, and a few screws and dowels. i am satisfied that it will do the job of holding my honda BF2. the clamp angle on the BF2 is opposite of the slight angle on the transom. therefore, i had no choice but to fabricate my own motor mount. tongue and groove joints were used for the attachment of the side arms and clamping pad. it is approx 8" tall, 14" wide.
[This message has been edited by bpong (edited February 27, 2007).]
IP: 209.222.53.88
15jg JuniorMember
posted March 04, 2007 09:53 PM
Looks Great! Let us know how it works out.
quote:Originally posted by bpong: attached is my take on an outboard motor mount for my CL14. it is constructed with 3/4" plywood, epoxy, and a few screws and dowels. i am satisfied that it will do the job of holding my honda BF2. the clamp angle on the BF2 is opposite of the slight angle on the transom. therefore, i had no choice but to fabricate my own motor mount. tongue and groove joints were used for the attachment of the side arms and clamping pad. it is approx 8" tall, 14" wide.
[This message has been edited by bpong (edited February 27, 2007).]
IP: 24.128.217.94
bpong Member
posted March 09, 2007 10:12 PM
thanx ! i certainly will report if it works or not...
IP: 209.222.53.28
All times are ET(US)
next newest topic | next oldest topic
Administrative Options: Close Topic | Archive/Move | Delete Topic
posted February 27, 2007 05:12 PM
