|
Author
|
Topic: Need a kickup rudder for CL14
|
Rich
unregistered
|
posted June 08, 2004 04:49 PM
 
Anyone have a used but useful kickup rudder for a CL14? Also, are the CL 14 and C-Lark 14 related? They sure look similar.IP: 67.160.150.76 |
Tom D CL16
Member
|
posted June 11, 2004 12:39 PM
 
I have a CL16 extra rudder. I don't know what the size or shape differences are.
It came with my boat when I bought it.
Just sitting in my workshop.
Tom D.IP: 205.188.117.21 |
Rich
unregistered
|
posted June 11, 2004 03:13 PM
Well, my rudder is about 40 inches long, 13 inches wide and the pins are set about 8 inches apart. If your rudder is reasonably close in size, a few inches in either direection is no big deal so long as it's not twice as big or something, I would be interested, if the price is right. Let me know. Also do you have any digital pictures you could email me? My email address is raduval@NOSPAMchryslersailors.com of course you want to take out the NOSPAM part of the address, I put that there in order to avoid spam email harvestors from filling my mailbox with spam. Thanks! -Rich IP: 67.160.150.76 |
whited
unregistered
|
posted June 11, 2004 04:28 PM
What's the matter? You don't need viagara, lengthening of certain body parts, or want to help some poor Nigerian move 16 million out of his country? IP: 156.34.94.147 |
Canadian Sailor
unregistered
|
posted June 11, 2004 05:16 PM
AH HA HA HA HA!------------------
Canadian Sailor ;)
"Before you criticize someone, you should walk a mile in their shoes. That way, when you
criticize them, you're a mile away and you have their shoes." IP: 216.208.193.186 |
Rich
unregistered
|
posted June 11, 2004 11:24 PM
It's amazing that the Nigerian Bank scam is still out there, I remember that from WAY back in the early 90's. Say, do the folks at CL ever read their email? I sent them two different emails asking about the CL 14, looking to find out if it's the same basic boat as the C-Lark 14 by Clark Boats, and I haven't heard back so much as a peep. IP: 67.160.150.76 |
Hyprstitch
Member
|
posted June 11, 2004 11:29 PM
Just call themIP: 67.40.133.135 |
whited
unregistered
|
posted June 12, 2004 08:17 AM
Once in a blue moon Cody may reply to something posted here...but if you want to reach them...use the phone. You'll be guaranteed to reach Tom or Cody and they are very helpful once you have their attention.IP: 156.34.85.79 |
Tom D CL16
Member
|
posted June 15, 2004 10:30 AM
Sorry about the delay.
My rudder blade is approx 35 inches long.
I don't have an extra top section for tiller and connection to the transom.
13 inches wide at the foot with a little extra arch at the bottom.
The top is approx 8 1/2 with the top rounded a little smaller.
The pivot hole is approx 3 1/8 centered.
The blade is approx 3/4 in thick.
Tom D.IP: 64.12.117.21 |
Rich
unregistered
|
posted June 16, 2004 06:28 PM
O.K. thanks. I need the whole thing, rudder, tiller ect. I've got a fixed rudder right now, and it would just be so much better to have a kick up for beaching and such.IP: 67.160.150.76 |
CL Staff
Administrator
|
posted June 23, 2004 10:39 PM
Hello:The CL16 rudderblade is the same as the CL14 blade. By same I mean, exactly the same part. Head is the same as well. Keeps cost down =) Cheers, ------------------
Cody J. Cote
Sales & Service Manager/Sailing Advisor
CL Sailboats
cody@clsailboats.com
~~~~~~~~_/)~~~~~~~~~
~~~~~~~~~~~~~~_/)~~~ IP: 24.150.223.225 |
