Page 1 of 1 1
Topic Options
#19474 - 02/01/18 10:32 AM Replace ropes
titpaul Offline
stranger


Registered: 06/05/16
Posts: 4
Hi there!
I've owned a CL16 for 2 years and I want to replace every ropes of the boat for the next season.
I think I'm going to use Polyester Double Braided Dacron.
My main question is which diameter and which length?

Here are my guess:
- Mainsheet Diameter 5/16" Length 65'
- Jibsheet Diameter 1/4" Length 66'
- Jib Halyard Diameter 3/16" Length 16'
- Main Halyard Diameter 3/16" Length 25'
- Boomwang Diameter ??? Length ???
- Topping Lift Diameter 1/4" Length ???

I can't access to the boat right now, this is why I need your help!

Thanks in advance!
Paul

Top
#19476 - 02/01/18 03:54 PM Re: Replace ropes [Re: titpaul]
Sandpaper Offline
addict


Registered: 02/20/16
Posts: 451
Hi Paul. Welcome aboard. It's good to have you here.

There isn't a lot of traffic this time of year, so it's good to get your post.

One detail about halyards, don't forget to double the length: once up the mast and back down to the deck again when there is no sail hoisted. And, don't forget to add enough length to be able to tie a knot at each end.

Good luck with your refit.
_________________________
Sail Mazinaw

Top
#19478 - 02/04/18 03:53 PM Re: Replace ropes [Re: titpaul]
riclab Offline
stranger


Registered: 02/03/18
Posts: 3
Loc: Qc, Ca
Hello Paul, on the specs sheet for the Cl16 in the C&L Boatworks site we find :
Stainless steel fittings, rigging (1/8") and turnbuckles
Quality 3/8" dacron sheets.

As a new owner of an old 83 neglected Cl16, I also need the size and length for each rope found on this stock Cl16. The boat is now resting besides the house under a well tie-wrapped tarp and ... a lot of snow. I did send an email to C&L Boatworks requesting a specs and parts list for the CL16 because I need to find what is missing to operate the main sail and the foils need
to be replaced. Anyway, I hope somebody will get us these infos and maybe a scan of the owner's manual, as it could be usefull.
I have a Mistral 16 that looks a lot like the CL16 but has a centre boom main sheeting system like the newer Cl16 ( if I look at the photos on the CL site. I can take measures of the genoa and main sheets (Mistral) if this can help you as these are stored indoor.
Richard

Top
#19479 - 02/05/18 01:12 PM Re: Replace ropes [Re: riclab]
titpaul Offline
stranger


Registered: 06/05/16
Posts: 4
Thank for the answers.
I have the user guide but it doesn't seem to display those details...
Please find eattached.


Attachments
CL16 Manual.pdf (20 downloads)
Description:



Top
#19483 - 02/08/18 03:18 PM Re: Replace ropes [Re: titpaul]
riclab Offline
stranger


Registered: 02/03/18
Posts: 3
Loc: Qc, Ca
Hello Paul , there seems to be a problem with the link to the cl16 manual : I get this message :
You don't have permission to access /44.pdf on this server.

i'll look at the rules of the forum maybe there is a catch \:\)

Richard

Top
#19484 - 02/08/18 03:33 PM Re: Replace ropes [Re: riclab]
riclab Offline
stranger


Registered: 02/03/18
Posts: 3
Loc: Qc, Ca
Hello Paul,
it seems ( ref FAQ ) file attachment is turned off for the forum . they dont say if we can transfer a file by using private message or if there is a way to upload a file that can be really usefull for many people.

Top
#19486 - 02/12/18 01:56 PM Re: Replace ropes [Re: riclab]
titpaul Offline
stranger


Registered: 06/05/16
Posts: 4
You'ren ot the firsto ne to ask for it so I created a poste just for the user guide.
http://www.vaxxine.com/clsailboats/ubbth...b6b7a#Post19485

Top
Page 1 of 1 1


Moderator:  Chris L 
Hop to: